3-Phase Decanter Centrifuge working principle:
The three-phase decanter centrifuge is formed by adding the heavy liquid pressure discharge mechanism on the basis of the two-phase horizontal screw machine structure. The material is continuously introduced into the spiral inner cylinder through the feed pipe, and enters the rotating drum after acceleration, using the liquid-solid-solid specific gravity difference. Under the action of the centrifugal force field, heavier solid phase deposits on the drum wall to form a sediment layer. The spiral continuously pushes the deposited solid phase to the cone end of the drum and discharges it out of the machine through the slag discharge port. The two liquid phase materials are divided into light and heavy two phases to form a light liquid phase and a heavy liquid phase respectively. The light liquid phase is discharged by gravity through the large end overflow of the drum, and the heavy liquid phase is discharged by pressure through the impeller mechanism. So as to realize the separation of liquid-liquid-solid three-phase mixture with different densities
LWS Series Three-phase Centrifuge corresponding to the Palm Oil Mill Capacity
|
|
Model of three-phase centrifuge |
|
|
|
15t/h |
LWS350×1435CX |
5~8m3/h |
22+5.5 |
|
30t/h |
LWS450×1845CX |
12~15m3/h |
30+11 |
|
45t/h |
LWS520×2150CX |
18~25m3/h |
45+15 |
|
60t/h |
LWS580×2400CX |
25~30m3/h |
75+18.5 |
|
80~90t/h |
LWS650×2600CX |
32~35m3/h |
90+22 |
3-Phase Decanter Centrifuge Application scope:
1) City tap water, domestic sludge dewatering;
2) Oil drilling mud dewatering;
3) Sludge Oil Recovery;
4) Refinery sludge concentrated dehydration;
5) Distiller's grains dehydration;
6) Paper, printing and dyeing wastewater separation;
7) Medical sludge dewatering;
8) Soy protein dehydration;
9) Plant oil clarification and separation;
10) Cosmetic clarification and separation;
11) Bleaching powder separation.
12) Palm oil sludge Separating.
1.What's the application of centrifuge?
2.How to clean the machine?
The machine has self-cleaning function. When the processing is finished, you just put one button and the machine will do the cleaning automatically.
3. How to choose the machine material?
For the material, we have stainless steel 304, 316 and 321 for your option. Generally SS304 is used. If there's suspension with corrosion, then SS 321 /316 or TA is needed.
4.What's the capacity of the machine?
5. How is the processing result?
Tagiau poblogaidd:
